The Zoom mimics are intended to give an in depth view of the areas that they cover. The OSL Demo site has been sectioned into two areas, one covering points in Building 1 and another cover the points in Building 2 and the Yard.
The Zoom mimic contains a graphical view of the particle counts, temperature, humidity, and pressure alarms. Each of the points are marked on the diagram of the building in their respective locations so that you can easily identify the points in alarm. You will also note the repeater and receiver statuses shown on the diagram. The room pressures for each of the rooms are clearly marked in each of the room in the drawing, and the differential pressures from one room to another is shown with an arrow indicating the direction of pressure flow.
Graphic |
Represented Data |
Small Square |
Particle Counts (0.5u & 5.0u counts) |
Small Circle |
Temperature & Humidity Points |
Larger Circle |
Repeaters / Receivers |
Arrow |
Differential Pressure |
Large Square with Pa value |
Room Pressure |
Alarm State |
Alarm Beacon Display |
No Alarms |
Sold Green |
Unacknowledged Alarms |
Flashing Red |
Unacknowledged Alarms that have returned to Normal |
Flashing Green |
Acknowledged Alarms |
Solid Red |
Below the room drawing you will see the tabular display of the current values for the points that are monitored. The table cell background colour is used to indicate a points alarm state as in the table below. Clicking on a table cell will show the tag you have selected, it's limits and it's current value.
Alarm |
Cell Background Colour |
No Alarms |
Green |
Alarm Limit Exceeded (except Particle Counts) (Lo or Hi Limit) |
Red |
Particle Count Alert Limit Exceeded (Hi Limit) |
Amber |
Particle Count Action Limit Exceeded (HiHi Limit) |
Red |
Building 1 Zoom